Changing Engine Oil Vacuum System Large Pump Portable Compact Drain Plug Car New

  
Changing Engine Oil Vacuum System Large Pump Portable Compact Drain Plug Car New. Easy to use; 40 pump strokes creates a powerful vacuum - no electricity needed.

Fast - just a few seconds to drain oil from a small engine, takes a few minutes for large engines. 8 quart capacity for big project large engine changes or multiple small engine changes. Portable compact size, allows for easy oil changes in tight spaces. No mess from spills or inconvenient drain plugs - used oil and other liquids are stored safely for proper disposal. Changing engine oil can be messy, time consuming and there is no good way to dispose of old oil.

The LiquiVac is a new user friendly and environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, release the hose clamp and LiquiVac extracts the oil directly into its plastic holding tank. Works great for boats, cars, trucks and more. USA dimensions: 16 inch length x 7 inch width x 11 inch height, tank size: 8 gallon, suction hose length 48 inches. Changing engine oil can be messy, time consuming and it is difficult to dispose of old oil.

The LiquiVac is a user friendly and an environmentally safe oil changing system. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, open the cap's valve and LiquiVac extracts the oil directly into its plastic holding tank.

It works great for boats, cars, trucks--and small engines too. Quickly change the oil in large engines--works with small engines too. Cars and Trucks Oil Change. The LiquiVac Oil Changing System for Large Projects and Engines makes car oil changes quick, clean, and easy.

This is especially true with hard to access drain plugs found in large engines. An average car or truck takes approximately 8-10 minutes to extract the oil, and without a mess. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes of boats, cars, and light trucks.

Plus, its tank has an 8 quart capacity allowing the user to make multiple oil changes of small engines too. The LiquiVac innovative design makes it easier to change the oil in engines such as boats with inaccessible drain plugs. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes to make your 4-cycle outboard oil change and inboard oil change easy. Also, don't forget the LiquiVac makes boat transmission changes very easy. Small Engines: Lawnmowers, Generators, Power Washers, Snow Throwers, and More.

Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil and, eventually, engine breakdowns.

With the LiquiVac small engine oil changes are a snap. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines super simple.

Which Model of LiquiVac Is Right for You? Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil; and, then engine breakdowns.

But, now there's a simple, fast and clean way to change your lawn and garden equipment's oil. It's the LiquiVac Oil Changing System. With the LiquiVac oil changes are a snap. The LiquiVac Small Engine Model works by creating negative pressure, or vacuum power in the tank by pumping the tank handle.

Each pump stroke takes air out of the tank creating a vacuum. Just 20 quick pump strokes creates vacuum power in the tank.

This vacuum is powerful enough to extract used oil out through the dipstick/fill tube with the release of the suction hose clamp, in just 14 seconds. With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines very easy. Perfect for lawn mowers, lawn & garden tractors, tillers, generators, snow throwers, ATVs and outboard motors as well as. It is called the Large Project/Engine Model for a reason.

Its 8 quarts capacity is large enough to handle several oil changes at one time, without recycling/emptying it. For example you can change your boat engine and several small engines in one session. Because of this, many do-it-yourself people love to knock out their oil change projects in one fell swoop. They can do it fast, without the mess.

Plus, the Large Project and Large Engine Model works great for large engines such as hard to change boats (inboards and outboards), trucks, and cars too. It is also very handy for to change transmission oil and hydraulic fluids too. Secure & Hassle Free Shopping. Please message us BEFORE leaving Negative of Neutral feedback.